Blog

Category Archives

vSphere with Tanzu on NSX-T: Part 1 – Configure NSX-T

This is part 1 of a series of videos discussing vSphere with Tanzu on NSX-T where I will demonstrate how to configure and operate vSphere with Tanzu on NSX-T.

In this video I’ll go over the required configuration in NSX-T to start with vSphere with Tanzu.


Edge TEP IP on the same subnet as local hypervisor TEP

In this blog post I will describe a new feature where NSX-T 3.1 and later supports Inter TEP communication within the same host. Edge TEP IP can be on the same subnet and VLAN as the local hypervisor TEPs. This is beneficial for collapsed cluster topologies where Edge Node VMs are running on vSphere Hosts which are configured for NSX-T, as Transport Nodes. There are a lot of topologies where there is a collapsed Compute & Edge or Management & Edge Clusters where this feature is beneficial.


Dedicated Edge Cluster for Tier-0 and Tier-1 Edge Clusters for each Supervisor Cluster

Edge Cluster Design for vSphere with Tanzu

This blog post discusses five Edge Cluster designs for NSX-T and vSphere with Tanzu.


Configure A/A Tier-0 with Tier-1 and 3-tier app topology with Terraform

This example shows how you can use the Terraform NSX-T Provider to quickly configure an Active-Active Tier-0 with a Tier-1 and a 3-tier app topology.


Configuring A/A Tier-0 Gateway with two VRFs and Tier-1 Gateways with NSX-T Terraform Provider

This blog post and demo shows how you can use the Terraform NSX-T Provider to quickly configure an Active-Active Tier-0 with two VRFs and attached Tier-1 Gateways.


Page 3 of 8First...234...Last

VCDX #284

VCDX #284

Twitter