NSX-T

Tag Archives

Configure A/A Tier-0 with Tier-1 and 3-tier app topology with Terraform

This example shows how you can use the Terraform NSX-T Provider to quickly configure an Active-Active Tier-0 with a Tier-1 and a 3-tier app topology.


Configuring A/A Tier-0 Gateway with two VRFs and Tier-1 Gateways with NSX-T Terraform Provider

This blog post and demo shows how you can use the Terraform NSX-T Provider to quickly configure an Active-Active Tier-0 with two VRFs and attached Tier-1 Gateways.


Configuring an A/S Tier-0 with a Tier-1 and 3-tier app topology with NSX-T Terraform Provider

This blog post and demo shows how you can use the Terraform NSX-T Provider to quickly configure an Active-Standby Tier-0 with a Tier-1 and a typical 3-tier app topology.


Configuring NSX-T Segment and IP Pools using Terraform

In this demo and blog post I will share how I’m using Terraform to create the segments and IP pools in NSX-T  to get started with deploying Edge Nodes and configuring Transport Nodes.


Static Routing and HA VIP Design – Edge Node on two VDS with four Physical NICs

This is the next post on a series of posts on NSX-T Edge Node design topologies.
In this blog post I will describe an Edge Node design topology hosting a Tier-0 Gateway with Static Routing with a HA VIP address configured.

With the Edge Node Virtual Appliances it is important to know on which vSphere Hosts the Edge Nodes are going to run, how many physical NICs are available and if the Edge Node is running on top of a VSS/VDS or N-VDS and how teaming is configured. In this design topology the Edge Nodes are running on hosts with two VDS with four Physical NICs.


Page 1 of 212

VCDX #284

VCDX-NV

Twitter