NSX

Category Archives

Configuring A/A Tier-0 Gateway with two VRFs and Tier-1 Gateways with NSX-T Terraform Provider

This blog post and demo shows how you can use the Terraform NSX-T Provider to quickly configure an Active-Active Tier-0 with two VRFs and attached Tier-1 Gateways.


N-VDS to VDS Migration without Uninstall NSX

In this video I will demonstrate how to migrate from a N-VDS to the new vSphere 7.0 VDS using NSX-T 3.0 without uninstalling NSX on the hosts.


Configuring an A/S Tier-0 with a Tier-1 and 3-tier app topology with NSX-T Terraform Provider

This blog post and demo shows how you can use the Terraform NSX-T Provider to quickly configure an Active-Standby Tier-0 with a Tier-1 and a typical 3-tier app topology.


VMworld NSX-T Operations and Troubleshooting (CNET3048BU)

At VMworld US the NSX-T Operations and Troubleshooting (CNET3048BU) session was the top attended NSX-T session. If you’ve missed it you can view it on the VMworld videos share:

https://videos.vmworld.com/global/2019?q=CNET3048BU


Dynamic Routing Design – Edge Node VM on one VDS with two Physical NICs

This is the next post on a series of posts on NSX-T Edge Node design topologies. In this blog post I will describe an Edge Node design topology hosting a Tier-0 Gateway with Dynamic Routing with BGP. This Edge Node topology supports Active/Active and Active/Standby Tier-0 design.

With the Edge Node Virtual Appliances it is important to know on which vSphere Hosts the Edge Nodes are going to run, how many physical NICs are available and if the Edge Node is running on top of a VSS/VDS or N-VDS and how teaming is configured. In this design topology the Edge Nodes are running on hosts with one VDS with two Physical NICs.


Page 2 of 5123...Last

VCDX #284

VCDX #284

Twitter