Deploying a PHP Guestbook Application on NSX-T with NCP 2.5

In this blog post I am going to deploy a simple multi-tier PHP Guestbook application with Redis using a Kubernetes cluster with the NSX-T Container Plugin (NCP) installed. In this post I am showing how various NSX-T objects are being created based on the deployment in Kubernetes.


VMworld NSX-T Operations and Troubleshooting (CNET3048BU)

At VMworld US the NSX-T Operations and Troubleshooting (CNET3048BU) session was the top attended NSX-T session. If you’ve missed it you can view it on the VMworld videos share:

https://videos.vmworld.com/global/2019?q=CNET3048BU


Dynamic Routing Design – Edge Node VM on one VDS with two Physical NICs

This is the next post on a series of posts on NSX-T Edge Node design topologies. In this blog post I will describe an Edge Node design topology hosting a Tier-0 Gateway with Dynamic Routing with BGP. This Edge Node topology supports Active/Active and Active/Standby Tier-0 design.

With the Edge Node Virtual Appliances it is important to know on which vSphere Hosts the Edge Nodes are going to run, how many physical NICs are available and if the Edge Node is running on top of a VSS/VDS or N-VDS and how teaming is configured. In this design topology the Edge Nodes are running on hosts with one VDS with two Physical NICs.


Static Routing and HA VIP Design – Edge Node on two VDS with four Physical NICs

This is the next post on a series of posts on NSX-T Edge Node design topologies.
In this blog post I will describe an Edge Node design topology hosting a Tier-0 Gateway with Static Routing with a HA VIP address configured.

With the Edge Node Virtual Appliances it is important to know on which vSphere Hosts the Edge Nodes are going to run, how many physical NICs are available and if the Edge Node is running on top of a VSS/VDS or N-VDS and how teaming is configured. In this design topology the Edge Nodes are running on hosts with two VDS with four Physical NICs.


Static Routing and HA VIP Design – Edge Node on one VDS with two Physical NICs

I will be starting a series of posts on NSX-T Edge Node design topologies.
In this blog post I will start with a Edge Node design topology hosting a Tier-0 Gateway with Static Routing with a HA VIP address configured.

With the Edge Node Virtual Appliances it is important to know on which vSphere Hosts the Edge Nodes are going to run, how many physical NICs are available and if the Edge Node is running on top of a VSS/VDS or N-VDS and how teaming is configured.


Page 1 of 4123...Last

VCDX #284

VCDX-NV

Twitter